News, January 2013: Hazardous locations Advantech Announces ADAM-4000 and ADAM-6000 Series have received UL Approved Class I, Division 2 Certification. They can be used in hazardous locations, i.e. gas, mining, oil or petrochemical industry where highly flammable substances may be produced, processed, stored, and transported to ensure the safety of the industrial facility. Certified for use in the oil and gas industries, the Advantech ADAM-4000 Series and ADAM-6000 Series won’t cause explosions if gases, vapors and liquids are present. Class I, Flammable Gases, Vapours or Liquids: Division 2: Where ignitable concentrations of flammable gases, vapours or liquids are not likely to exist under normal operating conditions. Zone 2: Where ignitable concentrations of flammable gases, vapours or liquids are not likely to exist under normal operating conditions.
Note: the term “intrinsically safe” applies to Class 1 or 2, Division 1, where ignitable concentrations of combustible dusts can exist all or some of the time under normal operating conditions. More info (Wikipedia) (opens in new tab)
RoHS – Restriction of Hazardous Substances Info on RoHS
[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row module_id=”Row” _builder_version=”4.27.0″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ _module_preset=”default” global_colors_info=”{}”][et_pb_text admin_label=”Sensor to computer or PLC interface for remote data acq & control” _builder_version=”4.27.0″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” use_border_color=”off” border_color=”#ffffff” border_style=”solid” global_colors_info=”{}”]
Sensor to computer or PLC interface for remote data acq & control
ADAM-4000 modules are compact, intelligent sensor-to- computer or PLC interface devices with built-in microprocessors which provide signal conditioning, analog I/O, digital I/O and comms all in an industrial hardened package. Can make stand alone, on/off controllers.
Warranty period: 2 years.
ADAM modules stand out because of their ability to accommodate multiple types and ranges of analog input. You select the type and range remotely by issuing commands from the host computer.
You may use just one type of unit for many different tasks, greatly simplifying design and maintenance.
They translate analog data into one of the following formats: engineering units, % of FSR, two’s complement or ohms. After the modules receive a request from the host, they send the data in the desired format over the RS-485 network.
The RS485 network can connect to a host computer using an …
Alarming: high and low alarm signalling with remotely configurable limit values.
Unregulated power 10 to 30VDC (power ripple must be <200mV p to p)
Protected against power reversal
Power and communication LED indicator
Network between each module with twisted pair wire (RS485 multi-drop network). Convert to RS232 with the ADAM-4520 converter, or use PCL-743/745 (RS485) card in PC.
RS485 to RS232 converter module for interface to computer or PLC: ADAM-4520, 4521
Baud rates from 1200bps up to 115Kbps (ADAM-4080: up to 38.4Kbps)
Up to 256 multidrop modules per serial port
UL Approved Class I, Division 2 Certification (Jan. 2013)
Transient suppression on RS-485 communication lines
Noise suppression circuits for communications
Watchdog timer on most modules
On-line module insertion and removal
ASCII commands & responses
High impact industrial grade plastic shell
Mount on DIN rails or stack together
Plug-in screw terminal block
Field configurable by software
Parameters stored locally in non-volatile EEPROM
Relay control
Operating temperature: -10 to 70� C (14 ~ 158� F)
Repeater Modules: ADAM-4510
Software support (see below) includes drivers and utilities, and
Drag & drop Windows software AdamView (see above), for programming tasks and displaying results
[/et_pb_text][et_pb_toggle admin_label=”Speed of ADAM-4000 Series System” _builder_version=”4.16″ _module_preset=”default” global_colors_info=”{}”]
Speed of ADAM-4000 Series System
For acquiring one data reading from an ADAM module, the host sends a string command to
the module and waits for the module response, then the response string back to the PC via communication line.
So the total time is depended on how long is the command string and the response string,
and how fast is the baud rate.
For example, if you use 115200 bps baud rate, it will take (1/115200)*10 seconds to send one character
(total 10 bits including start bit, 8 data bits and stop bit).
The total communication time to read one slot DI data from ADAM-5051 will be:
((character number)/11520+0.002) seconds
where (character number) is the total characters for command and response
and 0.002 is the wait time of ADAM-5051.
With the communication time to read 1-slot data, you can derive the maximum sampling speed in your application.
The sampling speed of A/D modules can be calculated in the same way.
ADAM modules with multiple channels support the read all channel command,
you can take use of it to save the acquiring time.
An ADAM system running with the GeniDAQ software, the minimum scan period is 10 ms.
[/et_pb_toggle][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built=”1″ custom_padding_last_edited=”on|desktop” admin_label=”section” _builder_version=”4.16″ background_color=”#ffffff” custom_padding=”20px||20px|” custom_padding_tablet=”50px|0|50px|0″ custom_padding_phone=”” da_disable_devices=”off|off|off” transparent_background=”off” padding_mobile=”off” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” global_colors_info=”{}” da_is_popup=”off” da_exit_intent=”off” da_has_close=”on” da_alt_close=”off” da_dark_close=”off” da_not_modal=”on” da_is_singular=”off” da_with_loader=”off” da_has_shadow=”on”][et_pb_row column_structure=”3_4,1_4″ _builder_version=”4.16″ custom_padding=”0px||0px|” global_colors_info=”{}”][et_pb_column type=”3_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text admin_label=”ADAM Converters – Advantech” module_id=”WDACS” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” use_border_color=”off” border_color=”#ffffff” border_style=”solid” global_colors_info=”{}”]
Programmable Alarm Output Analog input modules include high and low alarm signalling. After every A/D conversion, the digital value is compared with the high and low limit. The module can change the state of a digital output depending on the result of this comparison. This lets it perform On/Off control of a device independent of the host PC.
Event Counter On-board event counter can count to 65,535 transitions on the digital input.
The counter is read and cleared by the host. Max sample rate: 50Hz.
8 channels: 6 differential &
2 single ended inputs
±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mAADAM-4017+ has 8 diffl inputs, &
±4-20mA inputs,
Indep. config of channels
8 channels thermo-couple &
V module types J,K,T,
E, R,S,B
±20ma,
±4-20mA
±15mV to ±2.5V DataADAM-4018+ has 8 diffl inputs,
Indep. config of channels,
burn-out detect
Dig Out
2, open collector, can sink 30mA
None
4, open collector,
None
None
Dig Inp
1 in; event counter
1; event cntr
None
None
None
None
Features in common: Output: RS485; Baud Rates: 1200, 2400, 4800, 9600, 19,200 bps; Dim: 112 x 60 x 25 mm; Oper. temp 0°C to 70°C. Power Supply: +10 to 30VDC,
Isolation
3000V DC
3000V DC
3000V DC
3000V DC
3000V DC
3000V DC
Watchdog
Watchdog
Watchdog
Watchdog
Watchdog
Watchdog
Conversion rate: 10 samples/sec;
Bandwidth: 4Hz; 16 bit resolution
16 bit resolution;
Acc: 0.05% or better;
Zero Drift: ±0.03%/°C;
Span Drift: ±25ppm/° C;
Normal Mode Rejection of 50Hz: 100dB;
Common Mode Rejection at 50Hz: 150dB
Analog Output: 1ch, 0-10V, with 30mA drive, 3KV isolation
10 sa/sec, 13Hz, 0.1% or better,
Zero drift 0.03uV/° C
CMR: 92dB min
6 diffl inputs,
2 se inputsNote: ADAM-4018M has been phased out
ADAM-4017 & ADAM-4017+ can be controlled using simple ASCII commands over the serial link, similar to the other Adam modules.
For example, to read analog data from input 3 on ADAM module number 01, simply send “#013” to the module. The complete set of commands is described in the ADAM-4000 series operation manual.
Version �D2 is the current model which has a higher input impedance (2M versus 200k for the -D version). The �D2 is the only one available now. It supports �10V inputs.
ADAM-4019 Universal Analog Input Module – 8 channel
for users needing various analog input signals with various types of analog input: V, mV, mA, or thermocouple signals. 8 differential analog inputs. ±100mV, ±500mV, ±1V, ±2.5V, ±5V, ±10V, ±20 mA. Thermocouple types: J, K, T, E, R, S, B multi-ch/multi-range mechanism Isolation voltage: 3000 VDC, overvoltage to ±35VDC, Zin 20Mohms, Bandwidth 13.1Hz@50HZ, Acc 0.1% of voltage input, Zero drift 30�V/°C, Span drift ±25ppm/°C, CMR @50/60hz 92db min., Burn-out: upscale for T/C input Built-in watchdog timer. Power: unregulated 10 to 30VDC 1.2W Data
0 to 20mA, 4 to 20mA, 0-10 V. Effective resolution: 12-bit. Current load resistor for current output: 0 to 500 ohms Programmable output slope: 0.01 to 10,000 V/s (mA/sec). No digital IO. 3000V DC. Watchdog. Accuracy: ±0.1% of FSR for current output, ±0.2% of FSR for voltage output Resolution 0.025% FSR. Zero Drift: Vout: ±30µV/°C Iout: ±0.2µA/°C. Analog readback.
The ADAM-4100 series modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. Their built-in microprocessors, encased in rugged industrial-grade ABS plastic, independently provide intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design for convenient address reading.
8 differential and independent configuration channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection Broader Power Input Range: +10 ~ +48VDC LED dsiplay allows to monitor the status address settings Supports 200 VDC Hi common mode voltage Supports unipolar and bipolar input Supports +/- 15 V input range Supports filter auto-turning or filter-out 50 Hz / 60 Hz Online Firmware Update Data (.pdf)
8 differential & independent thermocouple configuration channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection Broader Power Input Range: +10~+48 VDC Supports filter auto-tuning or filter out 50 Hz / 60 Hz LED display allows to monitor the status address settings Online Firmware Update Data (.pdf)
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab) For detailed information on ADAM-4000 Series items, see from page 19.
Input levels: Dry Contact: 0: close to gnd, 1: Open. Wet Contact: 0: +2VDC max, 1: +4-30VDC
ADAM-4055 Digital I/O
8 inputs Input Voltage level: 10~50 VDC 8 outputs, digital LED indicator Open Collector to 40 VDC Over voltage protection: 70 VDC 2,500 VDC optical isolation
ADAM-4060 Relay Output Module
4-channel relay: 2 form A, 2 form C (500VAC isolation) Contacts: AC: 0.5A/120V DC: 1A/24V. W’dog tmr.
ADAM-4080/4080D Counter/Frequency Input Module
Two 32-bit counter channels, isolated, and a built-in programmable timer for frequency measurement. Digital alarm functions. You can download alarm values (32-bit) into the module from your host computer.
Programmable Digital Filter and Threshold: a unique programmable digital filter to reject noise on the input signal. You can specify separate time constants to provide stable output readings. You can preset the counters from your host computer. ADAM-4080 runs at up to 38.4Kbps (the other ADAM modules run at up to 115Kbps).
Front Panel Display: The ADAM-4080D module’s 5-digit LED displays the data being sent over a RS-485 line to the host computer. Programmed to show either channel 0 or channel 1. The ADAM-4080D enables users to monitor counter, frequency and RPM data as it is being transmitted. Data on ADAM-4080 (.pdf)
ADAM-4080 Counter & Frequency Module
2 ch, 5Hz-50KHz max, 32-bit (4 million counts). 2 digital outputs
ADAM-4080D Counter & Frequency, with LED Display
2 ch, 5Hz-50KHz max, 32-bit (4 million counts), LED Display 5 digits. 2 digital outputs (Cat p9-14)
ADAM-4150 Digital I/O Module
7 input channels and 8 output channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection Broader Power Input Range: +10 ~ +48 VDC LED display allows to monitor the status address settings Digital Filter Function DI channels can be used as 1 kVGz counters Over current/ short circuit protection DO channels support pulse output function Data on ADAM-4150 (.pdf)
8 Form A output channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD Protection Broader Power Input Range: +10 ~ +48 VDC LED display allows to monitor the status address settings DO channels support pulse output function B version ADAM-40xx…-B series modules can be configured for Modbus RTU protocol.
DR-75-24 DIN Rail Mounting Regulated Power Supply DR75-24
24VDC 75 watt power supply Vout: +24VDC ±1%, 3.2 Amps, -10 to 60°C, 55.5×125.2x100mm DR75-24
85-264VAC no switch, C tick approved Data sheet: click here $110+GST zcl
S-25-12
Regulated Power Supply S25-12
12VDC 25 watt power supply Vout: +12VDC ±10%, 2.1 Amps. 0 to 50°C, 99deep x97x36mm S25-12 zcl
100-240VAC no switch, Has output voltage adjuster. Large picture $90+GST
S-60-24 Panel Mounting
Regulated Power Supply S60-24
24VDC 60 watt power supply Vout: +24VDC ±10%, 3 A. S60-24 zcl
90-130VAC, or 180-260VAC, switchable, 0 to 50°C, 159x97x38mm Large picture C-Tick approved Data sheet: click here $90+GST
(These links open in a new tab or page)
DIN-60 DIN Rail Mount
DIN rail mount fitting for S-60-24 above $25+GST zcl
S-100-24
Regulated Power Supply S100-24
24VDC 100 watt power supply. 199x98x38mm $125+GST zcl
AC input switchable 10-120VAC or 200-240VAC, switch is inside the cage to avoid accidental change. Vout: 24VDC, 4.5A. Has output voltage adjuster.
Both Common and V+ output have 2 screw terminals each.
ADAM-4500 Intelligent PC-like Communication Controllers
ADAM-4500 has an 80188 CPU, 234KB SRAM for running programs, 256KB Flash ROM for program files (170KB free),
built-in ROM-DOS (sim to MS-DOS). Standard PC programs can run in this module.
COM1: RS232/485, COM2: RS485 with automatic data flow control for other ADAM modules,
a third RS232 port for program download, Real time clock, Watchdog timer.
Download utility incl. 10-30VDC unreg. 2W. -10 to +70°C
ADAM-4501 Ethernet-enabled Communication Controller with 8-ch DI/O
ADAM-4501D Ethernet-enabled Communication Controller with 8-ch DI/O and 7-segment LED
10/100Base-T Ethernet interface
Email alarm function
Built-in web server
Built-in FTP server and client
Supports versatile I/O modules
Full functions of standard TCP and UDP sockets
Optional 4 digit 7-segment LED display
Supports Modbus/RTU and Modbus/TCP function libraries
1.5 MB Flash ROM/640 KB SRAM
4 serial ports available
Integrates all operations in Windows utility
Data on ADAM-4501, -4502:
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
Prices:
ADAM-4500-AE PC-Based Communication Controller $303+GST 9/14
ADAM-4501-AE Ethernet-enabled Comm. Controller with 8 DI/O $407
ADAM-4502-AE Ethernet-enabled Comm Controller 1AI/1AO/2DI/2DO $500
ADAM-4502 Ethernet-enabled Communication Controller
with 2-ch AI/O and 4-ch DI/O
With its modular design, ADAM-4502 has all the same functionality as ADAM-4501, but provides different I/O options.
The ADAM-4502 provides one Ethernet interface and 4 serial ports module,
but also features 1 analog input, 1 analog output, 2 digital inputs and 2 digital outputs.
This versatility allows users to implement rich interfaces for different applications.
10/100Base-T(X) Ethernet interface
Email alarm function
Built-in web server
Built-in FTP server and client
Supports functionally versatile I/O modules
Full functions of standard TCP and UDP sockets
Supports Modbus/RTU and Modbus/TCP function libraries
1.5 MB Flash ROM/640 KB SRAM
4 serial ports
Integrated all operations in Windows utility Data on ADAM-4502 (pdf file, opens in new tab or window)
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
ADAM-4520 Converter Module, supports up to 32 Adam Modules on RS485 (2-wire) or RS422 (4-wire). Up to 115Kbps. RTS handshake.
Isolation: 3000VDC. Transient suppression on RS485 lines.
RS232 to RS485 (2-wire) or RS422 (4-wire). 1200bps to 115.2Kbps, networking to 4000ft. Power & data flow indicators. -10 to 70°C. Power 1.2 W. Automatic internal RS485 supervision – no external flow control signals required for RS485. The direction of data flow is automatically sensed, and the transmission direction is switched.
RS232 side has RTS handshake, DB9F connector at top.
RS485 half duplex has automatic direction control, transient suppression, space for termination resistors. Plug-in screw terminals.
LED Indicator: data activity: Yellow: RS232 in, Red: RS232 out, Orange: both
Supports up to 32 Adam Modules, or other RS485 devices.
Requires 10 to 30VDC unregulated, protected against power reversal. Case: ABS with captive mounting hardware. Has DIN-rail mounting adaptor, and SECC panel mounting bracket.
Connectors: RS232: DB9F at the top;
Screw terminals:
Gnd, +ve supply, RS422: TX+, TX-, RX+, RX-, RS485: DATA+, DATA-
LED on the ADAM-4520: Green light blinking: Transmitting data; Red light blinking: Receiving data
ADAM-4520-D2E Isolated RS-232 toRS-422/485 converter
1-4: $111ea, 5-9: $POA, 10+: $POS each Popular item 9/14
E at the end of the part no. indicates RoHS compliance
RS232 Cables for ADAM-4520: DB9M to DB9F (ADAM-4520 to PC Com port) lhb RC-3034 2m DB9M to DB9F $15+GST zmx RC-3036 5m DB9M to DB9F $16+GST M9022 10m DB9M to DB9F $32+GST
See alsoCordless Serial Adaptor – replace serial cables with Bluetooth wireless (opens new window)
RS232 to RS232 Isolator RS232/RS232 Isolator
RS232 to RS232 with isolation can be acheived by using two ADAM-4520 back to back using the RS422 connection between them.
You would need to use XON/XOFF handshaking.
Each ADAM-4520 needs unregulated power supply 10 to 30 VDC, e.g. Mains Adaptor see above
If they are fairly close to each other, one supply can be used for both.
ADAM-4522
RS232 to RS485/422
Non-isolated version of above. Not stocked in Australia… 2-3 weeks delivery.
ADAM-4510
RS485/422 Repeater
RS485/422 Repeater allows addition of 32 modules to the network and extends the network for another 1.2km. Transient suppression on RS-485 data lines. Up to 115Kbps.
ADAM-4510S
Repeater, isolated
As above, isolated to 3KV, Transient suppression on RS-485 data lines Prices: below this section
ADAM-4521
Addressable
RS232 to RS485/422
Used to interface an RS232 device to an RS485 network. Addressable, 1000VDC isol., watchdog timer, transient suppression. Auto senses direction of flow of data, no handshaking signals. Handles different baud rates between the two sides. DB9F on RS232 side.
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
Prices:
ADAM-4510-EE RS-422/485 Repeater $135+GST 9/14
ADAM-4510I-AE Wide-Temp RS-422/RS-485 Repeater $204
ADAM-4510S-EE RS-422/RS-485 Repeater with Isolation $175
ADAM-4520-EE RS-232 to RS-422/485 converter w/ iso. Rev. EE $111
ADAM-4520I-AE Wide-Temp RS-232 to RS-422/485 Converter $152
ADAM-4521-AE Addressable RS-422/485 to RS-232 Converter $221
AdamView Software for Adam Modules… see near top of this page
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built=”1″ custom_padding_last_edited=”on|desktop” admin_label=”section” _builder_version=”4.16″ background_color=”#ffffff” custom_padding=”20px||20px|” custom_padding_tablet=”50px|0|50px|0″ custom_padding_phone=”” da_disable_devices=”off|off|off” transparent_background=”off” padding_mobile=”off” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” global_colors_info=”{}” da_is_popup=”off” da_exit_intent=”off” da_has_close=”on” da_alt_close=”off” da_dark_close=”off” da_not_modal=”on” da_is_singular=”off” da_with_loader=”off” da_has_shadow=”on”][et_pb_row column_structure=”3_4,1_4″ _builder_version=”4.16″ custom_padding=”0px||0px|” global_colors_info=”{}”][et_pb_column type=”3_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text admin_label=”Fibre Optic” _builder_version=”4.27.0″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ use_border_color=”off” border_color=”#ffffff” border_style=”solid” global_colors_info=”{}” sticky_enabled=”0″]
Fibre Optic
Fiber optics are the perfect solution for applications where the transmission medium must be protected from electrical exposure, lighting, atmospheric conditions or chemical corrosion.
Single Mode: A fiber with a small core, only a few times the wavelength of light transmitted, that only allows one mode of light to propagate. Commonly used with laser sources for high speed, long distance links.
Multimode: A fiber with core diameter much larger than the wavelength of light transmitted that allows many modes of light to propagate. Commonly used with LED sources for lower speed, short distance links.
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.[/et_pb_text][/et_pb_column][et_pb_column type=”1_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][/et_pb_column][/et_pb_row][et_pb_row padding_mobile=”off” column_padding_mobile=”on” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text admin_label=”Power Supplies” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ use_border_color=”off” border_color=”#ffffff” border_style=”solid” global_colors_info=”{}” sticky_enabled=”0″]
ADAM-4541
Fibre Optic to
RS-232/422/485 Converter
Up to 115.2Kbps, direct plug-and-play, half/full duplex, bidirectional, stable and error free transmission, Automatic internal RS485 bus supervision, no external flow control signals required for RS485, transient suppression, LED for power and data flow, +10 to +30Vdc.
Multi-mode, 820nm, transmission distance 2.5km,
Optical power budget (attenuation) 12.5dB, Power consumption 1W typ, 1.5W max
ST connectors for TX & RX..
Screw terminals, ST fibre connector.
1200 to 115.2Kbps Prices: scroll down a little
ADAM-4542+
ADAM-4542+ converts single-mode fibre optic signals to RS-232/422/485 serial signals.
Transmission speeds of up to 115.2kbps
A newly invented redundancy feature also promises improved reliability.
Automatic internal RS-485 bus supervision
No external flow control signals required for RS-485 �
Transient suppression and over-current protection on RS-422/485 data lines �
LED for power and data flow indication
The ADAM-4542+ is specially designed to link various machinery equipped with RS-232/422/485 communication ports (such as computer systems or manufacturing machines).
Using standard SC connectors, the fiber optic port can accommodate a wide range of fiber optic cable.
ADAM-4542+ also supports the redundancy requirement.
You can use two pairs of ADAM-4542+ for a redundant architecture. This special design offers higher reliability.
Download user manual for ADAM-4542+Prices: scroll down a little
M15073 RS232 to Fibre Optic
M15074 RS422 to Fibre Optic
M15073 Converter RS232 to Fibre Optic with RTS/CTS
ADAM-4561 1-port Isolated USB to RS-232/422/485 converter
USB v1.1
RS-232/422/485 port supported Prices: scroll down a little
Transmission speed up to 115.2 Kbps
Isolation protection 3000 V DC provided
Automatic RS-485 data flow control
No external power supply necessary; the hub drives its power from the USB port
Plug-and-play installation
No additional IRQs or I/O ports required
Hot attach & detach function supported
Windows 98/ME/2000, Linux drivers supported
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
AdamView Software for Adam Modules… see near top of this page
Prices
ADAM-4541-BE Fiber Optic To RS-232/422/485 Converter $273+GST 9/14
ADAM-4542+-BE Fiber Optic to RS-232/422/485 Converter $528
ADAM-4561-CE 1-port Isolated USB to RS-232/422/485 Converter $164
ADAM-4562-AE 1 port isolated USB to RS232 converter module $123
The E at the end of the part number signifies RoHS compliance.
The -A, -D or -D2 after the part number is a revision number and can be ignored when ordering.
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built=”1″ custom_padding_last_edited=”on|desktop” admin_label=”section” _builder_version=”4.16″ background_color=”#ffffff” custom_padding=”20px||20px|” custom_padding_tablet=”50px|0|50px|0″ custom_padding_phone=”” da_disable_devices=”off|off|off” transparent_background=”off” padding_mobile=”off” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” global_colors_info=”{}” da_is_popup=”off” da_exit_intent=”off” da_has_close=”on” da_alt_close=”off” da_dark_close=”off” da_not_modal=”on” da_is_singular=”off” da_with_loader=”off” da_has_shadow=”on”][et_pb_row column_structure=”3_4,1_4″ _builder_version=”4.16″ custom_padding=”0px||0px|” global_colors_info=”{}”][et_pb_column type=”3_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text admin_label=”Modbus” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ use_border_color=”off” border_color=”#ffffff” border_style=”solid” global_colors_info=”{}” sticky_enabled=”0″]
Some of ADAM-4000 series modules can be configured for Modbus RTU protocol.
These are indicated in the price list above.
These modules are ideally suited for existing or new Modbus networks, providing a simple, effective, low cost solution for monitoring or control applications. Diagrams: click here
Integration with Operator Interface Panel
Benefits:
Compatible with any Operator Interface Panel
Easy I/O mapping to pre-built graphic display
Flexible network capacity based on remote architecture
Integration with SCADA Server
Benefits:
Compatible to most HMI software
Easy to build & maintain in I/O database
Flexible network capacity for both Serial and Ethernet networking.
Integration with RTU/DCS/PLC Control System
Benefits:
Easy integration with RTU/DCS/PLC Control System
A cost-effective remote I/O solution for system expansion requirements
Suitable for application in widely-distributed monitoring & control systems
Advantech provides a complete Modbus solution
– the ADAM-5511 and the ADAM-4572
The ADAM-5511 is a PC-based programmable controller with a Modbus interface,
integrating field signal (AI/O, DI/O, Counter, and Serial Communication) for data acquisition and control. See ADAM-5000 page.
On the other hand, the ADAM-4572 is a serial-to-Ethernet data gateway with a Modbus protocol,
enabling field status from the ADAM-5511 up to Enterprise data. Data on Serial Device Servers, including Modbus Data Gateway (Advantech site, opens in new tab)
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
ADAM-4572
Ethernet-to-ModBus
RS232/RS422/RS485 Server
While ModBus is becoming the de facto open standard for industrial networking protocol,
we can also see an ever-increasing dominance of Ethernet networking on the commercial market.
It is for sure that Ethernet will continue to make great advances into industrial networking.
With ADAM-4572 as a bi-directional communication server between Ethernet
and ModBus network, it is very easy to integrate both heterogeneous networks
within your factory.
The ADAM-4572 provides features such as 10/100 Mbps data rate for Ethernet/Fast Ethernet connection, RS232/RS422/RS485 serial port speed up to 115.2 Kbps,
auto-searching device, ModBus RTU, ModBus/ASCII, ModBus/TCP protocol, diagnostic LEDs, RJ-45 connectors and surge protection on network.With these merits for a true communication server between Ethernet and ModBus, the ADAM-4572 can be your best choice to integrate Ethernet and ModBus network within your factory for better network integration and resource sharing.• Supports 10/100 Mbps communication speeds
• Allows up to 8 clients to access field data simultaneously
• Supports popular HMI software with Modbus/TCP driver or OPC server
• Up to 31 Independent serial ports if configured to RS-485 serial mode
• Provides auto-searching device ID Windows utility
• Surge protection for RS-485 and power line
• Automatic RS-485 data flow control
• Easy mounting on DIN-rail or panel
• Supports Modbus/ASCII, RTU Protocol to control devices
[/et_pb_text][/et_pb_column][et_pb_column type=”1_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][/et_pb_column][/et_pb_row][et_pb_row padding_mobile=”off” column_padding_mobile=”on” _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text admin_label=”Software” _builder_version=”4.27.0″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” hover_enabled=”0″ use_border_color=”off” border_color=”#ffffff” border_style=”solid” global_colors_info=”{}” sticky_enabled=”0″]ADAM-4000-UTIL is included with the modules. Easy-to-use menu-driven utility software, including a terminal emulation program, makes configuration and calibration a snap.
Writing application programs with this software is simple, and you can learn the basics in just a few minutes.
PCLS-DLL-A ADAM Windows DLL drivers are also included, see below.
ADAM modules are supported by: ADAMView Software,
ADAM Windows DLL Driver PCLS-DLL-A
Included with ADAM modules.
This driver lets you control ADAM modules from any programming language that works with DLLs, including Visual Basic, Microsoft C++, Turbo C++ and Turbo Pascal. The driver package includes a VBX custom control for Visual basic and an easy to use Windows setup program with terminal emulation.
News, January 2013: Hazardous locations Advantech Announces ADAM-4000 and ADAM-6000 Series have received UL Approved Class I, Division 2 Certification. They can be used in hazardous locations, i.e. gas, mining, oil or petrochemical industry where highly flammable substances may be produced, processed, stored, and transported to ensure the safety of the industrial facility. Certified for use in the oil and gas industries, the Advantech ADAM-4000 Series and ADAM-6000 Series won't cause explosions if gases, vapors and liquids are present. Class I, Flammable Gases, Vapours or Liquids: Division 2: Where ignitable concentrations of flammable gases, vapours or liquids are not likely to exist under normal operating conditions. Zone 2: Where ignitable concentrations of flammable gases, vapours or liquids are not likely to exist under normal operating conditions.
Note: the term "intrinsically safe" applies to Class 1 or 2, Division 1, where ignitable concentrations of combustible dusts can exist all or some of the time under normal operating conditions. More info (Wikipedia) (opens in new tab)
RoHS - Restriction of Hazardous Substances Info on RoHS
[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row module_id="Row" _builder_version="4.27.0" _module_preset="default" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.16" _module_preset="default" global_colors_info="{}"][et_pb_text admin_label="Sensor to computer or PLC interface for remote data acq & control" _builder_version="4.27.0" background_size="initial" background_position="top_left" background_repeat="repeat" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}"]
Sensor to computer or PLC interface for remote data acq & controlADAM-4000 modules are compact, intelligent sensor-to- computer or PLC interface devices with built-in microprocessors which provide signal conditioning, analog I/O, digital I/O and comms all in an industrial hardened package. Can make stand alone, on/off controllers.
Warranty period: 2 years.
<div class="cs_product_box cs_enquire_btn">[ARForms_popup id=100 desc='Enquire Now' type='link' width='800' modaleffect='fade_in' is_ fullscreen='no' overlay='0.6' is_close_link='yes' modal_bgcolor='#000000' preset_data="item_meta_126||Sensor to computer or PLC interface for remote data acq & control"]</div><div class="clear"></div>
ADAM modules stand out because of their ability to accommodate multiple types and ranges of analog input. You select the type and range remotely by issuing commands from the host computer.
You may use just one type of unit for many different tasks, greatly simplifying design and maintenance.
They translate analog data into one of the following formats: engineering units, % of FSR, two's complement or ohms. After the modules receive a request from the host, they send the data in the desired format over the RS-485 network.
The RS485 network can connect to a host computer using an ...
RS232 port with ADAM-4520 RS232 to RS485 Converter, or (these links jump further down this page)
USB port using the ADAM-4561 USB to RS485 Converter, or ditto
Ethernet port using ADAM-4571 Ethernet to RS485 Converter (this link jumps to a different page, opens new tab or window)
Isolation to 3000V DC- Linearisation
Auto-ranging - Comparison - Limit Setting
16-bit A/D Conversion
Alarming: high and low alarm signalling with remotely configurable limit values.
Unregulated power 10 to 30VDC (power ripple must be <200mV p to p)
Protected against power reversal
Power and communication LED indicator
Network between each module with twisted pair wire (RS485 multi-drop network). Convert to RS232 with the ADAM-4520 converter, or use PCL-743/745 (RS485) card in PC.
RS485 to RS232 converter module for interface to computer or PLC: ADAM-4520, 4521
Baud rates from 1200bps up to 115Kbps (ADAM-4080: up to 38.4Kbps)
Up to 256 multidrop modules per serial port
UL Approved Class I, Division 2 Certification (Jan. 2013)
Transient suppression on RS-485 communication lines
Noise suppression circuits for communications
Watchdog timer on most modules
On-line module insertion and removal
ASCII commands & responses
High impact industrial grade plastic shell
Mount on DIN rails or stack together
Plug-in screw terminal block
Field configurable by software
Parameters stored locally in non-volatile EEPROM
Relay control
Operating temperature: -10 to 70� C (14 ~ 158� F)
Repeater Modules: ADAM-4510
Software support (see below) includes drivers and utilities, and
Drag & drop Windows software AdamView (see above), for programming tasks and displaying results
[/et_pb_text][et_pb_toggle admin_label="Speed of ADAM-4000 Series System" _builder_version="4.16" _module_preset="default" global_colors_info="{}"]
Speed of ADAM-4000 Series System
For acquiring one data reading from an ADAM module, the host sends a string command to
the module and waits for the module response, then the response string back to the PC via communication line.
So the total time is depended on how long is the command string and the response string,
and how fast is the baud rate.
For example, if you use 115200 bps baud rate, it will take (1/115200)*10 seconds to send one character
(total 10 bits including start bit, 8 data bits and stop bit).
The total communication time to read one slot DI data from ADAM-5051 will be:
((character number)/11520+0.002) seconds
where (character number) is the total characters for command and response
and 0.002 is the wait time of ADAM-5051.
With the communication time to read 1-slot data, you can derive the maximum sampling speed in your application.
The sampling speed of A/D modules can be calculated in the same way.
ADAM modules with multiple channels support the read all channel command,
you can take use of it to save the acquiring time.
An ADAM system running with the GeniDAQ software, the minimum scan period is 10 ms.
[/et_pb_toggle][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built="1" custom_padding_last_edited="on|desktop" admin_label="section" _builder_version="4.16" background_color="#ffffff" custom_padding="20px||20px|" custom_padding_tablet="50px|0|50px|0" custom_padding_phone="" da_disable_devices="off|off|off" transparent_background="off" padding_mobile="off" make_fullwidth="off" use_custom_width="off" width_unit="on" global_colors_info="{}" da_is_popup="off" da_exit_intent="off" da_has_close="on" da_alt_close="off" da_dark_close="off" da_not_modal="on" da_is_singular="off" da_with_loader="off" da_has_shadow="on"][et_pb_row column_structure="3_4,1_4" _builder_version="4.16" custom_padding="0px||0px|" global_colors_info="{}"][et_pb_column type="3_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][et_pb_text admin_label="ADAM Converters - Advantech" module_id="WDACS" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}"]
16-bit Integrating A/D converter with self calibration
3000VDC analog input isolation - Digital filter
Output data formats: engineering units, % of FSR, twos complement, or ohms. Data is sent in desired format when req. by host
Some analog modules contain two digital outputs and one digital input channel. They can drive solid state relays which in turn can control equipment.
[ARForms_popup id=100 desc='Enquire Now' type='link' width='800' modaleffect='fade_in' is_ fullscreen='no' overlay='0.6' is_close_link='yes' modal_bgcolor='#000000' preset_data="item_meta_126||ADAM Series Analog Input & Output Modules"]
Programmable Alarm Output Analog input modules include high and low alarm signalling. After every A/D conversion, the digital value is compared with the high and low limit. The module can change the state of a digital output depending on the result of this comparison. This lets it perform On/Off control of a device independent of the host PC.
Event Counter On-board event counter can count to 65,535 transitions on the digital input.
The counter is read and cleared by the host. Max sample rate: 50Hz.
Accessories Included Nylon DIN-rail mounting adaptor; SECC Panel mounting bracket. Plug-in screw terminals.
AdamView Software for ADAM Modules
PCLS-AdamView32 Data Acquisition and control software ... see near the top of this page.ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
Analog Input & Output ModulesSee also ADAM-4015 RTD Module, 6 ch and ADAM-4019 Universal Analog Input Module, 8 ch - below the table Prices: see below
ADAM
4011 & 4011D
4012
4013
4016
4017 8 ch
4017+ 8 ch
4018 8 ch4018+ 8 ch
Input Types
and ranges
Thermocouple
(D version has LED Display)
type J (0° to 760°),
T (-100° to +400°),
K, E, R, S, B.
V: ±15/±50mV
/±100/±500mV
/±1/±2.5 V,
I: 0 to 20mA
V & I Input±150mV
±500mV
±1V
±5V
±10 V±20 mA
RTD Input
temp sensors
Pt: 100ohm, 0.00385 or 0.003916
Ni: 120ohm
Cu: 10ohm
2, 3, or 4 wire
8 channels:
6 differential &
2 single ended inputs
±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mAADAM-4017+ has 8 diffl inputs, &
±4-20mA inputs,
Indep. config of channels
8 channels thermo-couple &
V module
types J,K,T,
E, R,S,B
±20ma,
±4-20mA
±15mV to ±2.5V DataADAM-4018+ has 8 diffl inputs,
Indep. config of channels,
burn-out detect
Dig Out
2, open collector, can sink 30mA
None
4, open collector,
None
None
Dig Inp
1 in; event counter
1; event cntr
None
None
None
None
Features in common: Output: RS485; Baud Rates: 1200, 2400, 4800, 9600, 19,200 bps; Dim: 112 x 60 x 25 mm; Oper. temp 0°C to 70°C. Power Supply: +10 to 30VDC,
Isolation
3000V DC
3000V DC
3000V DC
3000V DC
3000V DC
3000V DC
Watchdog
Watchdog
Watchdog
Watchdog
Watchdog
Watchdog
Conversion rate: 10 samples/sec;
Bandwidth: 4Hz; 16 bit resolution
16 bit resolution;
Acc: 0.05% or better;
Zero Drift: ±0.03%/°C;
Span Drift: ±25ppm/° C;
Normal Mode Rejection of 50Hz: 100dB;
Common Mode Rejection at 50Hz: 150dB
Analog Output: 1ch, 0-10V, with 30mA drive, 3KV isolation
10 sa/sec, 13Hz, 0.1% or better,
Zero drift 0.03uV/° C
CMR: 92dB min
6 diffl inputs,
2 se inputsNote:
ADAM-4018M has been phased out
ADAM-4017 & ADAM-4017+ can be controlled using simple ASCII commands over the serial link, similar to the other Adam modules.
For example, to read analog data from input 3 on ADAM module number 01, simply send “#013” to the module. The complete set of commands is described in the ADAM-4000 series operation manual.
Version �D2 is the current model which has a higher input impedance (2M versus 200k for the -D version). The �D2 is the only one available now. It supports �10V inputs.
ADAM-4019 Universal Analog Input Module - 8 channel
for users needing various analog input signals with various types of analog input: V, mV, mA, or thermocouple signals. 8 differential analog inputs. ±100mV, ±500mV, ±1V, ±2.5V, ±5V, ±10V, ±20 mA. Thermocouple types: J, K, T, E, R, S, B multi-ch/multi-range mechanism Isolation voltage: 3000 VDC, overvoltage to ±35VDC, Zin 20Mohms, Bandwidth 13.1Hz@50HZ, Acc 0.1% of voltage input, Zero drift 30�V/°C, Span drift ±25ppm/°C, CMR @50/60hz 92db min., Burn-out: upscale for T/C input Built-in watchdog timer. Power: unregulated 10 to 30VDC 1.2W Data
0 to 20mA, 4 to 20mA, 0-10 V. Effective resolution: 12-bit. Current load resistor for current output: 0 to 500 ohms Programmable output slope: 0.01 to 10,000 V/s (mA/sec). No digital IO. 3000V DC. Watchdog. Accuracy: ±0.1% of FSR for current output, ±0.2% of FSR for voltage output Resolution 0.025% FSR. Zero Drift: Vout: ±30µV/°C Iout: ±0.2µA/°C. Analog readback.
The ADAM-4100 series modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. Their built-in microprocessors, encased in rugged industrial-grade ABS plastic, independently provide intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design for convenient address reading.
8 differential and independent configuration channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection Broader Power Input Range: +10 ~ +48VDC LED dsiplay allows to monitor the status address settings Supports 200 VDC Hi common mode voltage Supports unipolar and bipolar input Supports +/- 15 V input range Supports filter auto-turning or filter-out 50 Hz / 60 Hz Online Firmware Update Data (.pdf)
8 differential & independent thermocouple configuration channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection Broader Power Input Range: +10~+48 VDC Supports filter auto-tuning or filter out 50 Hz / 60 Hz LED display allows to monitor the status address settings Online Firmware Update Data (.pdf)
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab) For detailed information on ADAM-4000 Series items, see from page 19.
Input levels: Dry Contact: 0: close to gnd, 1: Open. Wet Contact: 0: +2VDC max, 1: +4-30VDC
ADAM-4055 Digital I/O
8 inputs Input Voltage level: 10~50 VDC 8 outputs, digital LED indicator Open Collector to 40 VDC Over voltage protection: 70 VDC 2,500 VDC optical isolation
ADAM-4060 Relay Output Module
4-channel relay: 2 form A, 2 form C (500VAC isolation) Contacts: AC: 0.5A/120V DC: 1A/24V. W'dog tmr.
ADAM-4080/4080D Counter/Frequency Input Module
Two 32-bit counter channels, isolated, and a built-in programmable timer for frequency measurement. Digital alarm functions. You can download alarm values (32-bit) into the module from your host computer.
Programmable Digital Filter and Threshold: a unique programmable digital filter to reject noise on the input signal. You can specify separate time constants to provide stable output readings. You can preset the counters from your host computer. ADAM-4080 runs at up to 38.4Kbps (the other ADAM modules run at up to 115Kbps).
Front Panel Display: The ADAM-4080D module's 5-digit LED displays the data being sent over a RS-485 line to the host computer. Programmed to show either channel 0 or channel 1. The ADAM-4080D enables users to monitor counter, frequency and RPM data as it is being transmitted. Data on ADAM-4080 (.pdf)
ADAM-4080 Counter & Frequency Module
2 ch, 5Hz-50KHz max, 32-bit (4 million counts). 2 digital outputs
ADAM-4080D Counter & Frequency, with LED Display
2 ch, 5Hz-50KHz max, 32-bit (4 million counts), LED Display 5 digits. 2 digital outputs (Cat p9-14)
ADAM-4150 Digital I/O Module
7 input channels and 8 output channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection Broader Power Input Range: +10 ~ +48 VDC LED display allows to monitor the status address settings Digital Filter Function DI channels can be used as 1 kVGz counters Over current/ short circuit protection DO channels support pulse output function Data on ADAM-4150 (.pdf)
8 Form A output channels Broader Operating Temperature Range Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD Protection Broader Power Input Range: +10 ~ +48 VDC LED display allows to monitor the status address settings DO channels support pulse output function B version ADAM-40xx...-B series modules can be configured for Modbus RTU protocol.
PS12V1.512V DC 1.5A Switchmode Regulated Plugpack
Individual Output Leads for Screw Terminal Connection
· Regulated rnz r nz
· EMI Filtered
· Slimline for use with all power boards
· Light Weight
· Overload Protection
· Short Circuit Protection
Specifications:
Input: 100-240VAC 50/60Hz
Output: 12VDC 1.5A
Average Efficiency: >75%
Data sheet (pdf file, new tab)
PS24V1.25
PS24V1.2524V DC 1.25A Switchmode Regulated Plugpack
Individual Output Leads for Screw Terminal Connection
· Regulated
· EMI Filtered
· Light Weight
· Overload Protection
· Short Circuit Protection
Input: 100-240VAC 50/60Hz
Output: 24VDC 1.25A
Average Efficiency: >80%
Data Sheet (pdf file, new tab)
DR-75-24 DIN Rail Mounting Regulated Power Supply
DR75-24
24VDC 75 watt power supply Vout: +24VDC ±1%, 3.2 Amps, -10 to 60°C, 55.5x125.2x100mm DR75-24
85-264VAC no switch, C tick approved Data sheet: click here $110+GST zcl
S-25-12
Regulated Power Supply
S25-12
12VDC 25 watt power supply Vout: +12VDC ±10%, 2.1 Amps. 0 to 50°C, 99deep x97x36mm S25-12 zcl
100-240VAC no switch, Has output voltage adjuster. Large picture $90+GST
S-60-24 Panel Mounting
Regulated Power Supply
S60-24
24VDC 60 watt power supply Vout: +24VDC ±10%, 3 A. S60-24 zcl
90-130VAC, or 180-260VAC, switchable, 0 to 50°C, 159x97x38mm
Large picture C-Tick approved Data sheet: click here $90+GST
(These links open in a new tab or page)
DIN-60 DIN Rail Mount
DIN rail mount fitting for S-60-24 above $25+GST zcl
S-100-24
Regulated Power Supply
S100-24
24VDC 100 watt power supply. 199x98x38mm $125+GST zcl
AC input switchable 10-120VAC or 200-240VAC, switch is inside the cage to avoid accidental change. Vout: 24VDC, 4.5A. Has output voltage adjuster.
Both Common and V+ output have 2 screw terminals each.
ADAM-4500 Intelligent PC-like Communication Controllers
ADAM-4500 has an 80188 CPU, 234KB SRAM for running programs, 256KB Flash ROM for program files (170KB free),
built-in ROM-DOS (sim to MS-DOS). Standard PC programs can run in this module.
COM1: RS232/485, COM2: RS485 with automatic data flow control for other ADAM modules,
a third RS232 port for program download, Real time clock, Watchdog timer.
Download utility incl. 10-30VDC unreg. 2W. -10 to +70°C
ADAM-4501 Ethernet-enabled Communication Controller with 8-ch DI/O
ADAM-4501D Ethernet-enabled Communication Controller with 8-ch DI/O and 7-segment LED
10/100Base-T Ethernet interface
Email alarm function
Built-in web server
Built-in FTP server and client
Supports versatile I/O modules
Full functions of standard TCP and UDP sockets
Optional 4 digit 7-segment LED display
Supports Modbus/RTU and Modbus/TCP function libraries
1.5 MB Flash ROM/640 KB SRAM
4 serial ports available
Integrates all operations in Windows utility
Data on ADAM-4501, -4502:ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
Prices:
ADAM-4500-AE PC-Based Communication Controller $303+GST 9/14
ADAM-4501-AE Ethernet-enabled Comm. Controller with 8 DI/O $407
ADAM-4502-AE Ethernet-enabled Comm Controller 1AI/1AO/2DI/2DO $500
ADAM-4502 Ethernet-enabled Communication Controller
with 2-ch AI/O and 4-ch DI/O
With its modular design, ADAM-4502 has all the same functionality as ADAM-4501, but provides different I/O options.
The ADAM-4502 provides one Ethernet interface and 4 serial ports module,
but also features 1 analog input, 1 analog output, 2 digital inputs and 2 digital outputs.
This versatility allows users to implement rich interfaces for different applications.
[ARForms_popup id=100 desc='Enquire Now' type='link' width='800' modaleffect='fade_in' is_ fullscreen='no' overlay='0.6' is_close_link='yes' modal_bgcolor='#000000' preset_data="item_meta_126||ADAM-4502 Ethernet-enabled Communication Controller with 2-ch AI/O and 4-ch DI/O"]
10/100Base-T(X) Ethernet interface
Email alarm function
Built-in web server
Built-in FTP server and client
Supports functionally versatile I/O modules
Full functions of standard TCP and UDP sockets
Supports Modbus/RTU and Modbus/TCP function libraries
1.5 MB Flash ROM/640 KB SRAM
4 serial ports
Integrated all operations in Windows utility
Data on ADAM-4502 (pdf file, opens in new tab or window)
ADAM-4502 price - see above[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built="1" custom_padding_last_edited="on|desktop" admin_label="section" _builder_version="4.16" background_color="#ffffff" custom_padding="20px||20px|" custom_padding_tablet="50px|0|50px|0" custom_padding_phone="" da_disable_devices="off|off|off" transparent_background="off" padding_mobile="off" make_fullwidth="off" use_custom_width="off" width_unit="on" global_colors_info="{}" da_is_popup="off" da_exit_intent="off" da_has_close="on" da_alt_close="off" da_dark_close="off" da_not_modal="on" da_is_singular="off" da_with_loader="off" da_has_shadow="on"][et_pb_row column_structure="3_4,1_4" _builder_version="4.16" custom_padding="0px||0px|" global_colors_info="{}"][et_pb_column type="3_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][et_pb_text admin_label="Communications Modules" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" hover_enabled="0" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}" sticky_enabled="0"]
Communications Modules
Power required: 10 to 30 VDC unregulated. DIN rail or panel mounting. Plug-in screw terminals.
Isolation to 3000VDC where applicable.
RS485 lines have automatic flow control, and transient protection
[/et_pb_text][/et_pb_column][et_pb_column type="1_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][/et_pb_column][/et_pb_row][et_pb_row padding_mobile="off" column_padding_mobile="on" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" make_fullwidth="off" use_custom_width="off" width_unit="on" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][et_pb_text admin_label="Power Supplies" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}"]
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
ADAM-4520 Converter Module, supports up to 32 Adam Modules on RS485 (2-wire) or RS422 (4-wire). Up to 115Kbps. RTS handshake.
Isolation: 3000VDC. Transient suppression on RS485 lines.
RS232 to RS485 (2-wire) or RS422 (4-wire). 1200bps to 115.2Kbps, networking to 4000ft. Power & data flow indicators. -10 to 70°C. Power 1.2 W.
Automatic internal RS485 supervision - no external flow control signals required for RS485. The direction of data flow is automatically sensed, and the transmission direction is switched.
RS232 side has RTS handshake, DB9F connector at top.
RS485 half duplex has automatic direction control, transient suppression, space for termination resistors. Plug-in screw terminals.
LED Indicator: data activity: Yellow: RS232 in, Red: RS232 out, Orange: both
Supports up to 32 Adam Modules, or other RS485 devices.
Requires 10 to 30VDC unregulated, protected against power reversal. Case: ABS with captive mounting hardware. Has DIN-rail mounting adaptor, and SECC panel mounting bracket.
Connectors: RS232: DB9F at the top;
Screw terminals:
Gnd, +ve supply, RS422: TX+, TX-, RX+, RX-, RS485: DATA+, DATA-
LED on the ADAM-4520: Green light blinking: Transmitting data; Red light blinking: Receiving data
ADAM-4520-D2E Isolated RS-232 toRS-422/485 converter
1-4: $111ea, 5-9: $POA, 10+: $POS each Popular item 9/14
E at the end of the part no. indicates RoHS compliance
RS232 Cables for ADAM-4520: DB9M to DB9F (ADAM-4520 to PC Com port) lhb
RC-3034 2m DB9M to DB9F $15+GST zmx
RC-3036 5m DB9M to DB9F $16+GST
M9022 10m DB9M to DB9F $32+GST
See alsoCordless Serial Adaptor - replace serial cables with Bluetooth wireless (opens new window)
RS232 to RS232 Isolator RS232/RS232 Isolator
RS232 to RS232 with isolation can be acheived by using two ADAM-4520 back to back using the RS422 connection between them.
You would need to use XON/XOFF handshaking.
Each ADAM-4520 needs unregulated power supply 10 to 30 VDC, e.g. Mains Adaptor see above
If they are fairly close to each other, one supply can be used for both.
ADAM-4522
RS232 to RS485/422
Non-isolated version of above. Not stocked in Australia... 2-3 weeks delivery.
ADAM-4510
RS485/422 Repeater
RS485/422 Repeater allows addition of 32 modules to the network and extends the network for another 1.2km. Transient suppression on RS-485 data lines. Up to 115Kbps.
ADAM-4510S
Repeater, isolated
As above, isolated to 3KV, Transient suppression on RS-485 data lines
Prices: below this section
ADAM-4521
Addressable
RS232 to RS485/422
Used to interface an RS232 device to an RS485 network. Addressable, 1000VDC isol., watchdog timer, transient suppression. Auto senses direction of flow of data, no handshaking signals. Handles different baud rates between the two sides. DB9F on RS232 side.
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
Prices:
ADAM-4510-EE RS-422/485 Repeater $135+GST 9/14
ADAM-4510I-AE Wide-Temp RS-422/RS-485 Repeater $204
ADAM-4510S-EE RS-422/RS-485 Repeater with Isolation $175
ADAM-4520-EE RS-232 to RS-422/485 converter w/ iso. Rev. EE $111
ADAM-4520I-AE Wide-Temp RS-232 to RS-422/485 Converter $152
ADAM-4521-AE Addressable RS-422/485 to RS-232 Converter $221
AdamView Software for Adam Modules... see near top of this page
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built="1" custom_padding_last_edited="on|desktop" admin_label="section" _builder_version="4.16" background_color="#ffffff" custom_padding="20px||20px|" custom_padding_tablet="50px|0|50px|0" custom_padding_phone="" da_disable_devices="off|off|off" transparent_background="off" padding_mobile="off" make_fullwidth="off" use_custom_width="off" width_unit="on" global_colors_info="{}" da_is_popup="off" da_exit_intent="off" da_has_close="on" da_alt_close="off" da_dark_close="off" da_not_modal="on" da_is_singular="off" da_with_loader="off" da_has_shadow="on"][et_pb_row column_structure="3_4,1_4" _builder_version="4.16" custom_padding="0px||0px|" global_colors_info="{}"][et_pb_column type="3_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][et_pb_text admin_label="Fibre Optic" _builder_version="4.27.0" background_size="initial" background_position="top_left" background_repeat="repeat" hover_enabled="0" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}" sticky_enabled="0"]
Fibre Optic
Fiber optics are the perfect solution for applications where the transmission medium must be protected from electrical exposure, lighting, atmospheric conditions or chemical corrosion.
Single Mode: A fiber with a small core, only a few times the wavelength of light transmitted, that only allows one mode of light to propagate. Commonly used with laser sources for high speed, long distance links.
Multimode: A fiber with core diameter much larger than the wavelength of light transmitted that allows many modes of light to propagate. Commonly used with LED sources for lower speed, short distance links.
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.[/et_pb_text][/et_pb_column][et_pb_column type="1_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][/et_pb_column][/et_pb_row][et_pb_row padding_mobile="off" column_padding_mobile="on" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" make_fullwidth="off" use_custom_width="off" width_unit="on" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][et_pb_text admin_label="Power Supplies" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" hover_enabled="0" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}" sticky_enabled="0"]
ADAM-4541
Fibre Optic to
RS-232/422/485 Converter
Up to 115.2Kbps, direct plug-and-play, half/full duplex, bidirectional, stable and error free transmission, Automatic internal RS485 bus supervision, no external flow control signals required for RS485, transient suppression, LED for power and data flow, +10 to +30Vdc.
Multi-mode, 820nm, transmission distance 2.5km,
Optical power budget (attenuation) 12.5dB, Power consumption 1W typ, 1.5W max
ST connectors for TX & RX..
Screw terminals, ST fibre connector.
1200 to 115.2Kbps Prices: scroll down a little
ADAM-4542+
ADAM-4542+ converts single-mode fibre optic signals to RS-232/422/485 serial signals.
Transmission speeds of up to 115.2kbps
A newly invented redundancy feature also promises improved reliability.
Automatic internal RS-485 bus supervision
No external flow control signals required for RS-485 �
Transient suppression and over-current protection on RS-422/485 data lines �
LED for power and data flow indication
The ADAM-4542+ is specially designed to link various machinery equipped with RS-232/422/485 communication ports (such as computer systems or manufacturing machines).
Using standard SC connectors, the fiber optic port can accommodate a wide range of fiber optic cable.
ADAM-4542+ also supports the redundancy requirement.
You can use two pairs of ADAM-4542+ for a redundant architecture. This special design offers higher reliability.
Download user manual for ADAM-4542+Prices: scroll down a little
M15073 RS232 to Fibre OpticM15074 RS422 to Fibre Optic
M15073 Converter RS232 to Fibre Optic with RTS/CTSM15074 Converter RS422 to Fibre OpticData on both: click here (jumps to different page)
ADAM-4561 USB to
RS232/RS422/RS485
Power supplies
- see above
ADAM-4561 1-port Isolated USB to RS-232/422/485 converter
USB v1.1
RS-232/422/485 port supported Prices: scroll down a little
Transmission speed up to 115.2 Kbps
Isolation protection 3000 V DC provided
Automatic RS-485 data flow control
No external power supply necessary; the hub drives its power from the USB port
Plug-and-play installation
No additional IRQs or I/O ports required
Hot attach & detach function supported
Windows 98/ME/2000, Linux drivers supported
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
AdamView Software for Adam Modules... see near top of this page
Prices
ADAM-4541-BE Fiber Optic To RS-232/422/485 Converter $273+GST 9/14
ADAM-4542+-BE Fiber Optic to RS-232/422/485 Converter $528
ADAM-4561-CE 1-port Isolated USB to RS-232/422/485 Converter $164
ADAM-4562-AE 1 port isolated USB to RS232 converter module $123
The E at the end of the part number signifies RoHS compliance.The -A, -D or -D2 after the part number is a revision number and can be ignored when ordering.
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section][et_pb_section fb_built="1" custom_padding_last_edited="on|desktop" admin_label="section" _builder_version="4.16" background_color="#ffffff" custom_padding="20px||20px|" custom_padding_tablet="50px|0|50px|0" custom_padding_phone="" da_disable_devices="off|off|off" transparent_background="off" padding_mobile="off" make_fullwidth="off" use_custom_width="off" width_unit="on" global_colors_info="{}" da_is_popup="off" da_exit_intent="off" da_has_close="on" da_alt_close="off" da_dark_close="off" da_not_modal="on" da_is_singular="off" da_with_loader="off" da_has_shadow="on"][et_pb_row column_structure="3_4,1_4" _builder_version="4.16" custom_padding="0px||0px|" global_colors_info="{}"][et_pb_column type="3_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][et_pb_text admin_label="Modbus" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" hover_enabled="0" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}" sticky_enabled="0"]
Some of ADAM-4000 series modules can be configured for Modbus RTU protocol.
These are indicated in the price list above.
These modules are ideally suited for existing or new Modbus networks, providing a simple, effective, low cost solution for monitoring or control applications. Diagrams: click here
Integration with Operator Interface Panel
Benefits:
Compatible with any Operator Interface Panel
Easy I/O mapping to pre-built graphic display
Flexible network capacity based on remote architecture
Integration with SCADA Server
Benefits:
Compatible to most HMI software
Easy to build & maintain in I/O database
Flexible network capacity for both Serial and Ethernet networking.
Integration with RTU/DCS/PLC Control System
Benefits:
Easy integration with RTU/DCS/PLC Control System
A cost-effective remote I/O solution for system expansion requirements
Suitable for application in widely-distributed monitoring & control systems
Advantech provides a complete Modbus solution
- the ADAM-5511 and the ADAM-4572
The ADAM-5511 is a PC-based programmable controller with a Modbus interface,
integrating field signal (AI/O, DI/O, Counter, and Serial Communication) for data acquisition and control. See ADAM-5000 page.
[ARForms_popup id=100 desc='Enquire Now' type='link' width='800' modaleffect='fade_in' is_ fullscreen='no' overlay='0.6' is_close_link='yes' modal_bgcolor='#000000' preset_data="item_meta_126||ADAM-5511 and the ADAM-4572"]
On the other hand, the ADAM-4572 is a serial-to-Ethernet data gateway with a Modbus protocol,
enabling field status from the ADAM-5511 up to Enterprise data.
Data on Serial Device Servers, including Modbus Data Gateway (Advantech site, opens in new tab)
ADAM Series Brochure & Data (pdf file, 29 pages, opens in new tab)
For detailed information on ADAM-4000 Series items, see from page 19.
ADAM-4572
Ethernet-to-ModBus
RS232/RS422/RS485 Server
While ModBus is becoming the de facto open standard for industrial networking protocol,
we can also see an ever-increasing dominance of Ethernet networking on the commercial market.
It is for sure that Ethernet will continue to make great advances into industrial networking.
With ADAM-4572 as a bi-directional communication server between Ethernet
and ModBus network, it is very easy to integrate both heterogeneous networks
within your factory.
The ADAM-4572 provides features such as 10/100 Mbps data rate for Ethernet/Fast Ethernet connection,
RS232/RS422/RS485 serial port speed up to 115.2 Kbps,
auto-searching device, ModBus RTU, ModBus/ASCII, ModBus/TCP protocol, diagnostic LEDs, RJ-45 connectors and surge protection on network.With these merits for a true communication server between Ethernet and ModBus, the ADAM-4572 can be your best choice to integrate Ethernet and ModBus network within your factory for better network integration and resource sharing.• Supports 10/100 Mbps communication speeds
• Allows up to 8 clients to access field data simultaneously
• Supports popular HMI software with Modbus/TCP driver or OPC server
• Up to 31 Independent serial ports if configured to RS-485 serial mode
• Provides auto-searching device ID Windows utility
• Surge protection for RS-485 and power line
• Automatic RS-485 data flow control
• Easy mounting on DIN-rail or panel
• Supports Modbus/ASCII, RTU Protocol to control devices
Data on ADAM-4572 (pdf file, opens in new tab)
Price: see above
[/et_pb_text][/et_pb_column][et_pb_column type="1_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][/et_pb_column][/et_pb_row][et_pb_row padding_mobile="off" column_padding_mobile="on" _builder_version="4.16" background_size="initial" background_position="top_left" background_repeat="repeat" make_fullwidth="off" use_custom_width="off" width_unit="on" global_colors_info="{}"][et_pb_column type="4_4" _builder_version="4.16" custom_padding="|||" global_colors_info="{}" custom_padding__hover="|||"][et_pb_text admin_label="Software" _builder_version="4.27.0" background_size="initial" background_position="top_left" background_repeat="repeat" hover_enabled="0" use_border_color="off" border_color="#ffffff" border_style="solid" global_colors_info="{}" sticky_enabled="0"]ADAM-4000-UTIL is included with the modules. Easy-to-use menu-driven utility software, including a terminal emulation program, makes configuration and calibration a snap.
Writing application programs with this software is simple, and you can learn the basics in just a few minutes.
PCLS-DLL-A ADAM Windows DLL drivers are also included, see below.
ADAM modules are supported by:ADAMView Software,
ADAM Windows DLL Driver PCLS-DLL-A
Included with ADAM modules.
This driver lets you control ADAM modules from any programming language that works with DLLs, including Visual Basic, Microsoft C++, Turbo C++ and Turbo Pascal. The driver package includes a VBX custom control for Visual basic and an easy to use Windows setup program with terminal emulation.
The driver works with COM ports 1 to 4. It supports all ADAM functions except for the ADAM-4080D's counter (Counter/Frequency module).
Programming Example (BASIC)
If the command"#05" is sent to a network of ADAM modules, the module whose address is 05H will respond with a reading, for example: "+4.834".
OPEN "COM1: 9600, N, 8, 1,RS ,CS ,CD ,DS" AS #1
CMD$ = "%2333324100600"
PRINT #1, CMD$
'ADAM-4011 is now configured to address 24H, T-type thermocouple input, 9600bps, eng. unit data format'
CMD$="#24"
PRINT #1, CMD$ 'Read analog input data'
RESULT$ = INPUT$(5,#1)
PRINT "Temperature = ",RESULT$
CLOSE: END
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]
ADAM modules stand out because of their ability to accommodate multiple types and ranges of analog input. You select the type and range remotely by issuing commands from the host computer.
